Guitar & Bass Protector

Suitable for Travel Guitar & Bass.

Protects Ukulele from Scratches, Dirt and Scuffs ! Super anti-scratches, dust repelling, static free, strong point. 3H hardness protect the face of your ukulele top. Static ad-herence, no residue.

Guitar Protector

► INFO
- Protector
- Wipe cloth
- Dust-removal
- Squeegee card
- Cleaning wipes

► Steps by Steps
1. Take out the protector and place it on the guitar to find a suitable position. Mark on both sides of the protective sticker: red mark ① BACK face down, black mark ② FRONT face up.
2. Take out the yellow wipe to clean the surface of the piano for fingerprints, grease, dust and dirt.
3. Take out the blue dust removal tape and stick the dust off the surface after wiping.
4. Peel off the "red label ① BACK" side of the protective sticker, align the position where you want to stick it, and then gently stick the protective sticker.
5. Remove the cardboard and gently push out the air bubbles.
6. Finally, tear off the film on the "Black Label ② FRONT" and you're done!

aNueNue Ukulele Protector

► INFO
- Protector(Right & Left) each pcs 16.7 x 7.6 cm
- Wipe cloth 5.5 x 7.5 cm
- Dust-removal 10.5 x 5 cm
- Squeegee card 3 x 5 cm

► How to use
1. Take out the protector and place the left and right protective stickers on the Guitar. Mark on both sides of the protective sticker: red mark ① BACK face down, black mark ② FRONT face up.
2. Using the grid on the film, outline the Ukulele body shape, the edge is indented by about 2-3mm, and use a pen to point out the outline on the grid.
3. After connecting the traced points into a line, use scissors or a blade to cut smooth edges.
4. Take out the yellow wipe to clean the surface of the piano for fingerprints, grease, dust and dirt.
5. Take out the blue dust removal tape and stick the dust off the surface after wiping.
6. Tear off the "red label ① BACK" side of the protective sticker, align the position where you want to stick it, and gently stick the protective sticker. 7. Remove the cardboard and gently push out the air bubbles.
8. Finally, tear off the film on the "Black Label ② FRONT" and you're done!